All operating systems of Raspberry Pi are installed with the same user and password (pi / raspberry). It’s very convenient to install, but it can cause security problems. In addition, you should change your password regularly for security reasons. Here’s how.

For a desktop Raspberry Pi operating system, the password can be changed via the Raspberry Pi Configuration tool in the main menu. And on Raspberry Pi OS Lite or SSH, the command to change the password is passwd.

For more information, read on. I will explain step by step how to change the password in all cases.
I will also give you instructions on what to do if you lose your password.

Changing the password in the Raspberry Pi operating system with the desktop

If you are using the Raspberry Pi operating system with Desktop, it should be fairly easy to change your password. I have attached pictures below with step-by-step instructions to help you with this process.
By the way, you need to have access to the Raspberry Pi OS session to do this. If you have lost your password, please read the last part of these instructions before continuing below.

Master Welcome

Before I go any further, let me remind you that the Raspberry Pi operating system’s Welcome Wizard is a very useful tool that allows you to change a lot of things, including the Pi’s user password.

That’s pretty much the first question you’ll be asked:
alt=width=509 height=335 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />

If you have just installed your system, this is the easiest way to change your password. Follow the wizard, set the password and configure the basic settings.

data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2020/12/1608398820_992_How-to-Easily-Install-Apps-on-Raspberry-Pi-OS-5.jpg />

Raspberry Pi
Course Take it to the next level.
I’m here to help you get started with your Raspberry Pi and learn all the necessary skills in the right order.

Raspberry Pi configuration tool

Chances are you’re here because you changed your password on first boot, haven’t used it since you logged in without a password, and you don’t remember the password you set.

Don’t worry, you can easily change your password by following these few steps:

  • Open the main menu in the top left corner of the screen.
  • Go to Settings and click on Raspberry Pi Configuration.
    alt=width=534 height=319 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/1616663265_791_How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />
  • A window appears with many parameters that you can adjust.
    Click Change Password:
    alt=width=591 height=453 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/1616663265_922_How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />.
  • alt=width=352 height=174 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/1616663266_82_How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />
    Choose a new password and enter it twice.
    If you are doing this for security reasons, I strongly recommend using a long password (you don’t have to use a lot of special characters, but long passwords are preferable).
    For example, I often use a program that generates long and easy to remember passwords.
  • The Raspberry Pi operating system then displays a success message:
    alt=width=345 height=109 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/1616663267_128_How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />.

That’s it! Now you have changed your password and you can continue with what you were planning :).

By the way, if you’re new to the Raspberry Pi, I can help you learn it a lot faster. My Raspberry Pi Boot Camp course will help you discover the Raspberry Pi device and its secrets step by step. In just a few hours, you’ll be ready to get started on any awesome project you’re interested in.

Changing the password on Raspberry Pi OS Lite (or SSH)

If you only have access to the terminal, via the Raspberry Pi OS Lite or SSH remote access, you cannot use the above tools.
But don’t worry, it’s not that hard because you only have to remember one order (and you have the choice).

Raspy Configuration

This is not the fastest method, but certainly the easiest to remember.
Raspi-config is a great tool available on the Raspberry Pi operating system to configure most of your system settings.
It contains a function to change the password, which we will use in this section:

  • Open a terminal, connect via SSH or connect to the Raspberry Pi OS Lite.
  • Start with the raspi configuration:
    sudo raspi-config
    Your current password may be required to proceed. See the last part of this guide if you have lost it.
  • Go to the system options (1).
    alt=width=813 height=252 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/1616663267_598_How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />
  • Then click on Password (S3).
    alt=width=796 height=244 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/1616663268_942_How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />
  • Confirm with the Enter key.
  • Enter the new password twice.
    alt=width=472 height=101 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/1616663269_772_How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />
  • That’s it, you should now get a confirmation message:
    alt=width=717 height=469 data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/03/1616663270_236_How-to-Change-Password-on-Raspberry-Pi-OS-Complete-Guide.jpg data-ez= />
  • You can leave the Raspy configuration with Esc.

So, Raspi-config is pretty handy to remember, but like I said, there’s an even faster solution.

Command password

Raspi-config is just a nice interface that runs many Linux commands in the background. If you remember this simple command, you can go straight to the last step.

Command line to change the password on the Raspberry Pi :
password

The good news is that this solution works on any Linux distribution, even if you’re not using the Raspberry Pi operating system.

Restore access if you have forgotten your password

We discussed how to change your password if you still have access to a user session. But can you do that if you have lost your password?
Yes, there are actually several solutions.

Use another user

The easiest way is to log in with a different administrator user. If you followed my instructions for creating a new user on your Raspberry Pi, you can use them to reset another user’s password.

You need a court order for that.
Command to change the password of a user from another session:
sudo passwd

For example:
sudo passwd pi

If you are logged in with a different usage, you can change that immediately and access that session again.

data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2020/12/1607451018_397_How-to-Install-VMWare-ESXi-on-a-Raspberry-Pi-Step.jpg />

Learn the Raspberry Pi in 30 days
Download the ebook.
Discover the secrets of the Raspberry Pi in a 30-day challenge.

Root entry

A similar method is to use the root user directly.
If you have allowed him SSH access, you can follow the same steps as for the other user (you just don’t need sudo).

What you can also do is delete the password request for another session. Here is the command to do that:
sudo passwd -d
After that, you can log in with this user without a password and change it by following the first part of this guide.

Reminder: Learn how to log in as root on your Raspberry Pi here.

Unfortunately, there is no other way. Since the root user is not enabled by default, you can run in single user mode or the mode I occasionally use in Linux.

frequently asked questions

How do I change the password for my Raspberry Pi?

Software ‘ Raspansky

How do I find the password for my Raspberry Pi?

Restoration-Raspberry-Pee

How do I find the username and password for my Raspberry Pi?

For raspberry the username is pi and the password is raspberry. You can change the password by running the passwd command, with the raspi-config utility, or with the Raspberry Pi Configuration graphical utility. In Arch, the user name is root and the password is root.

forgot raspberry pi password,default raspberry pi password,raspberry pi default root password,reset raspberry pi password headless,raspberry pi change password ssh,raspberry pi password not working,Feedback,Privacy settings,How Search works,raspberry pi default password ssh,raspberry pi list users

You May Also Like

Dell XPS 8940 Desktop Review

Dell XPS 8940 Desktop Computer USA 1+ alt=Dell XPS 8940 Desktop data-ezsrc=http://server.digimetriq.com/wp-content/uploads/2021/04/Dell-XPS-8940-Desktop-Review.jpg…

How to rollback from Windows 11 to Windows 10

I have been hearing a lot about Windows 10 lately, but I…

INVALID_FLOATING_POINT_STATE error in Windows 10 [FIXED]

In the last few days, several people have reported seeing the dreaded…

E iLA App Download for Android, iOS Free (Latest Version)

Related Tags:   e-ila app free download,  e-ila app download link,  e-ila…