Ever since the HTC Vive launch, users have been experiencing sync issues with their base stations. Some users can pair their base stations and syncs perfectly, while others have troubles. Some users even experienced a range of problems, from being unable to sync at all, to having the base station cut out.

HTC Vive’s wireless room-scale base stations can be quite finicky, to say the least. While the base stations are essential to making room-scale VR an efficient and practical way to play VR games, they also require a surprisingly large amount of patience from the end user. This is because the base stations have to be unplugged and moved around the room after every single use, and sometimes even after every few uses.

Every so often, something happens to your HTC Vive setup that causes the base stations to become unresponsive. And while the vast majority of issues that occur are easily resolved, sometimes the solution involves a more complicated process.

If you’ve been having problems with the HTC Vive base stations, we have a few suggestions that should help you avoid any more problems. We’ve already put some of these changes to the test, and they’re fantastic!

HTC’s Vive VR headset comes with two base stations that act as the headset’s and headphones’ primary connections. Because the base stations also serve as data gateways, you can expect all of your gaming data to be transmitted back to the headset for a seamless and consistent experience.

By turning off and on the Vive base stations, you may have been able to fix the sync problem. However, this is not the ideal option since it may result in further headset issues. The base station signals, for example, may interfere with your headset and create sync issues. However, this can be simply rectified with a single line of code.



If you possess an HTC Vive, you’ve most likely spent a significant amount of time setting up the headset’s base stations. Securing the base stations, whether with the provided mounting kit or additional attachments, is an important part of the setup process. What if, however, your base stations refuse to communicate with one another?

Here’s how to fix the HTC Vive’s recurring sync issues.

Be on the lookout for firmware updates.

Before going on to our other troubleshooting recommendations, be sure to check for any pending firmware updates. This eliminates the potential of a software-related issue that was later fixed in an update. While these issues aren’t common, they have the potential to save a lot of time.

The following steps will show you how to update the firmware on your base stations.

  1. Open the drop-down menu in the SteamVR desktop program.
  2. Select Devices > Update Firmware.
  3. You’ll be asked to connect your base stations through a micro-USB connection if they need to be updated.


Check to verify whether your base stations are in the correct location.

The HTC Vive’s setup process is one of the most difficult aspects of the gadget, and it takes much longer than most of its rivals. This is mostly due to the tracking configuration of the headset, which requires the usage of the two base stations on the headset.

According to HTC, the following conditions should be fulfilled in order to provide the best tracking:

  • Both base stations should be positioned above the user’s head (ideally above 6.5 feet).
  • There should be no more than 16 feet between the two stations.
  • Base stations should be angled between 30 and 45 degrees downward.

Check the channels on your base stations.

The HTC Vive base stations operate on a number of different channels, which the device uses to choose which sync method to use. The channel may be changed by pressing a button on the back of each base station.

  • If wireless optical sync is used, one station should be on channel B and the other on channel C.
  • If the two stations are linked by a sync cable, channel A should be selected for one and channel B for the other.


Ensure that your base stations are securely fastened to the wall.

A rotating motor produces infrared light, and each HTC Vive station has one. The vibrations generated by this may cause the station to become unstable if it is not securely fastened. If the vibrations are interfering with synchronization and tracking, a blue LED on the front of the base station should illuminate.

The HTC Vive comes with a mounting kit that is the most secure way to install base stations. To prevent the base station’s position from moving over time, tighten the clamping ring and wingnut that keep it in place.

If you don’t want to permanently install your HTC Vive’s base station in the wall, there are a few other options.

Consider using a sync cable.

By switching to a cable sync for your base stations, you may simplify the HTC Vive’s tracking system even further. The required cable is included in the HTC Vive box and is 15 meters in length.

Here’s how to link your HTC Vive base stations using a sync cable.

  1. Connect the two base stations together using the sync cable.
  2. One base station on the HTC Vive should be set to channel A, while the other should be set to channel B. Channels may be changed by pressing the button on the back of the stations.

Is it still a problem for you?

Please let us know if you continue to experience issues. We’ll be glad to help in the comments section!

I’ve owned a Vive since April and have had some problems with sync from the beginning. I’d had enough of attempting to sync the base stations to the headset and decided to look for a solution on the internet.

Most Commonly Asked Questions

What should I do if my base stations aren’t syncing?

If your base stations aren’t synchronizing, use the steps below to fix the problem. It’s better to use Windows 10. You’ll need to reset the base stations if they still aren’t synchronizing. If the base stations still refuse to sync, there may be a problem.

What is the procedure for resetting the Vive base stations?

By unplugging the base station from the computer (or removing the batteries) and re-pairing it to Vive, you may reset Vive base stations. Q: Which desktop PC is ideal for Beat Saber? Your budget and objectives will determine which PC is ideal for Beat Saber. But

How can I upgrade the Vive base stations manually?

To manually update your Vive Base Stations, follow these instructions: Open SteamVR and plug in the Vive Base Station. In SteamVR, go to Settings (gear icon). In the Settings box, choose Base Station. Select Firmware Update.

This essay addressed the following issues in broad strokes:

  • Base station repair for HTC Vive
  • green light on HTC Vive base station
  • sync cable for base station
  • The base station for vive has not been found.
  • Base stations for HTC Vive aren’t synchronizing.

There are two primary ways to interact with virtual reality. You can have a VR headset which tracks your head movement, and renders the world in front of you in front of your eyes, as if you were there, or you can use a VR headset which tracks the position of a tracking base. For most purposes, these systems are indistinguishable. However, there are times when one or the other is preferred.. Read more about how to connect base stations to steamvr and let us know what you think.

Frequently Asked Questions

How do I fix my base stations not syncing?

If your base stations are not syncing, there are a few things you can try. First, make sure the power cable is plugged in and that the power switch on the back of the base station is turned on. Next, if you have multiple base stations, make sure they are all connected to the same power source. Finally, if none of these solutions work for you, please contact our support team at [email protected]

How do I reset Vive base stations?

The easiest way to reset the base stations is to unplug them from the wall and then plug them back in.

How do I manually update Vive base stations?

In order to update your base stations, you must first remove the old ones. To do this, go to Settings > Devices > Base Stations and click on the one you want to remove. Then press the Remove button at the bottom of the screen. Once removed, plug in a new set of base stations and follow these steps again.

This article broadly covered the following related topics:

  • htc vive base station repair
  • vive base stations green but not detected
  • htc vive base station green light
  • vive base station not detected
  • vive base station sync cable
You May Also Like

Logitech M331 Software Download, Driver Update, Manual Setup

The Logitech M331 is a gaming mouse that is designed for people…

Top 11 best Primewire Alternatives for movie streaming –

If you’ve ever streamed free movies online, you know that after a…

Five Reasons Why People Change Their Netflix Region

People have different tastes when it comes to watching content on Netflix.…

Reasons Why Proper Data Destruction is Important

Like with any shared shared drives, accidental deletion of data from a…