If you own Alcatel 1B (2020) (5002A, 5002D, 5002F, 5002I, 5002M, 5002X) and want to install TWRP Recovery 3.4.0 root and flash on your device, you are on the right page.

If you are an Android enthusiast and want to install a root and TWRP recovery on your favorite computer, you are on the right page. We will guide you through the basic process of Alcatel 1B (2020) in writing this article.

The TWRP is designed from materials and has an attractive user interface (UI). If you follow this manual, you can install the latest version of the TWRP for Alcatel 1B (2020). You can download TWRP Recovery via the links in the foreword of this article. Note: this is an unofficial TWRP repair and only for Alcatel 1B (2020) (Confirm the model by going to Settings>Information). The procedure described below is only for anchoring and installing TWRP on Alcatel 1B (2020), do not test this method on other equipment.

Alcatel 1B (2020) has the specifications of the Qualcomm QM215 (28 nm) chipset, a quad-core processor with Cortex-A53 at 1.3 GHz, an Adreno 308 graphics processor, a 5.5-inch, 78.1 cm2 (~74) display.Screen to body ratio 6%), IPS LCD, 720 x 1440 pixels, 18:9 ratio (density ~293 pixels per inch), 16GB internal memory 2GB RAM, 13MP main camera, f/2.0, (wide), 1/4.0″, 1.12 µm, autofocus, 5 MP, f/2.2, (wide), 1/5″, 1.12 µm, 3000 mAh Li-ion battery.

If you want to exploit the full potential of the Alcatel 1B (2020) hardware, the main problem is the routine and flashing of custom recovery settings such as TWRP. Replacement ROMs often have limited and unsupported adaptation functions. If you have a root device and a flashing TWRP repair, you can install any custom ROM, modules, kernel, Xposed, etc., as well as many applications that need superuser access to work properly. The Android One-Click Root Tool allows you to quickly and easily provide data to your device via a PC or MOTK.

Relevant website

Download A520FXXU6CRH1 for Samsung GALAXY A5 SM-A520F VAU AUSTRALIA

ALWAYS Install/update the Motorola Moto M XT1663 on Android 7.0 read Nougat Stock ROM

October 2018

Brief description and benefits of TWRP Recovery

TWRP (Team Win Recovery Project) – open source community development project. The TWRP firmware allows your device to install any firmware, download smartphones, change zip files for settings, Xposed modules for settings, root and unroot processes in a single click. You can also make a full backup of Nandroid and restore it later with a single click, delete the image file, remove bloatware, overlock and underclock. TWRP allows you to easily clean up the cleanup, cache and data after flashing an image file to display changes and correct minor errors caused by caching.

To install the TWRP, your Alcatel 1B (2020) phone must have an unlocked charger. This means that you must first unlock the bootloader for the main control of the device and make all settings.

Exclusion of liability : AndroidWeblog.com covers everything, albeit in a very neat way, so that our readers get exactly what they want, but there is still a modest chance that the most important questions that may arise here will be answered. It is therefore in the user’s interest to follow the instructions very carefully in order to avoid problems with your device.
Routing and flashing custom ROM firmware will undoubtedly invalidate your device warranty and AndroidWeblog.com is in no way responsible for invalid warranty or brick devices.

Building

Check the model number of the model you want to use:

  • Alcatel 1B (2020) (models: 5002A, 5002D, 5002F, 5002I, 5002M, 5002X) (models: 5002A, 5002D, 5002F, 5002I, 5002M, 5002X)

You must ensure that you have read the disclaimer carefully before using the phone regularly and that you agree to continue to take risks.

The phone must be at least 70% charged, otherwise it may cause complications during testing. Why take the risk? Try charging it.

If you use a basic phone or if you want to install a custom ROM, it’s a good idea to back up your phone. Back up all your media – photos, videos and more – to your PC and contacts in the cloud.

ALWAYS read how to control the root of the P20 cube and set the TWRP recovery.

(Applies only to the PC method, skip when using the MOT method).

You need to enable the USB debugging option by going to Settings, Applications, and Developer Options.

Vegetable root oil 1B (2020)Downloads

You can download the universal ADB drivers here (if you already have drivers installed on your PC, you can ignore this).

Download the Platform Tools / SDK Tools package from the Android SDK to your PC. (Android Command Line Tools > SDK Toolkit)

Download here the TWRP recovery plan for Alcatel 1B (2020)
Restoration of TWRP 3.4.0 (link media fire)

Download Chainfire SuperSU from here.

Download Magisk Manager from here.

Make sure you have downloaded the required files (link in the History section of this article). Then keep going up the stairs.

Alcatel 1B (2020)Starterloader approval phases

Comments : If you have already unlocked the charger, skip these steps.

Step one: You must first connect the Alcatel 1B (2020) to your computer in Quick Start mode. You can restart the device to load quickly with a command in the ADB terminal:

Advertising loader

Step two: Now open the Adb terminal in your PC and enter this command:

Quick start activation

Step three: Then give me the team:

Quick start activation

At this point, your device will automatically restart. You can now use Root Alcatel 1B (2020) because the starter charger of your device is already unlocked.

Steps to TWRP 3.4.0 firmware/recovery installation on Alcatel 1B (2020)

Step one: Suppose you have already downloaded the platform tools of the Android SDK (SDK Manager) to your PC. The platform’s tools include the required ADB executable files and fast downloads.

Step two: Make sure the drivers are installed on your computer. Then proceed to the next step.

Pay attention: If the development settings and USB debug settings are already enabled on your device, as suggested in the Benefits section, just skip steps 3 and 4 and go directly to step 5.

Step three: Now activate the development settings on your Alcatel 1B (2020) device. Just go to Settings -> About and find the build number, then click 7 times on the build number, this will activate the development settings of your device.

Step four: If you already have a USB debug, skip this step. Otherwise, open the developer options and enable USB debugging.

Step five: Now open a command line on your computer/ADB terminal and just enter the command:

Advertising loader

Step 6 : The device should not have entered the Quick Start mode. Now copy the downloaded TWRP.img file in the desired section to the same directory as the ADB and Rapidboot binaries. Rename the file to twrp.img and enter this command:

fast recovery of flash memory twrp.img

and execute this command, choose:

early recovery

Step 7 (important) : Some devices do not automatically override user recovery the first time they are started. You can search Google using hotkeys to put your device in recovery mode. After executing the quick start commands, press and hold the appropriate key combination to enter TWRP mode. Once the unit is in TWRP mode, the TWRP automatically corrects the ROM inventory to prevent the TWRP from being replaced by a stock recovery.

ALWAYS learn how to organise the Root Motorola Moto Z2 Force XT1789 and install TWRP recovery.

After entering the fast reload command, press and hold the Combo key and load into the TWRP. Once the TWRP is loaded, the TWRP corrects the ROM to prevent replacement of the TWRP ROM. If you do not perform this step, repeat the installation.

Procedure for root installation of Alcatel 1B (2020) / Magisk or SuperSU

Check if you have downloaded SuperSU or Magisk Manager (link in the required section of this article) Then continue climbing the stairs.

Attention: You can use Magisk Manager or Super SU, but only one, so choose well. Log in to Magisk Manager if you’re not sure.

Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Alcatel 1B (2020) Smartphone.

Step two: All you have to do now is charge for the repair. An additional backup of the ROMs can be made via the TWRP interface. Nevertheless, I advise you to support the ROM. Because if the process fails, you can make the ROM blink.

How to Root Alcatel 1B (2020) and Install TWRP Recovery 3.4.0

Step three: Touch Install and then navigate to SuperSU.zip or magisk.zip and run your finger over the firmware confirmation file (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.

Congratulations, you are now rooted in Alcatel 1B (2020), and you have also illuminated the TWRP. Now you can install the Xposed frame and customize your smartphone to your needs. If you want to check, you can download and check the root status using the Root Checker application.

You May Also Like

The Technology behind Face Unlocking in Smartphones

What is facial recognition technology? Facial recognition technology is part of the…

Best WIFI Routers and Modem Deals for Amazon Prime Day 2020

Facebook Twitter interest Reddit Messenger WhatsApp Life today is impossible without a…

Garmin Forerunner 30 Review: A Complete Buyers Guide

The Garmin Forerunner 35 is one of the most advanced and useful…

15+ Best Apps For Windows 10 Laptop Free Download

Top 15+ applications for Windows 10 laptop free download – When you…