If you own Xiaomi Mi Note 10 Lite and also want to install the device root and TWRP Recovery 3.4.0-14 flash memory, you are on the right page. Thanks to Whyle, a senior member of the XDA, for publishing the TWRP Recovery for Mi Note 10 Lite aircraft.
- The ott works.
- Flash Rom works
- The aid from F2FS
- Support for fast loading jobs
It’s not working:
- Adb Lateral load
- Restore Backup and Flash images (system manufacturer’s product)
- full support for Android 11
Mi Note 10 Lite is equipped with the Qualcomm SDM730 Snapdragon 730G (8nm) chipset specification, an Octa-core processor (2×2.2GHz Cryo 470 Gold and 6×1.8GHz Cryo 470 Silver), an Adreno 618 GPU, a 6.47-inch display, a 102.8 cm2 screen area (~87.8% screen-to-body ratio), AMOLED technology, HDR10, 430 nits (type), 1080 x 2340 pixels, 19.Ratio 5:9 (~398 pixels per inch density), internal memory/RAM 64GB 6GB RAM, 128GB 6GB RAM, 128GB 8GB RAM, 64MP main camera, f/1.9, 26mm (wide), 1/1.72″, 0.8µm, PDAF, laser autofocus / 8MP, f/2.2, (ultra wide), 1/4.0″, 1.12µm / 2MP, f/2.4, (macro) / 5MP, f/2.4, (deep), 16MP autocamera, f/2.5, (wide), 1/3.06″ 1.0µm, 5260mAh Li-Po battery, non-removable, 30W fast charge.
If you are an Android enthusiast and want to do TWRP recovery on your beloved device, you have come to the right place. Throughout this article we will guide you through the process of rooting the Mi Note 10 Lite.
The TWRP is characterized by its material design and attractive user interface (UI). If you follow this manual, you can install the latest version of TWRP for Mi Note 10 Lite. You can download TWRP Recovery from the links in the example section of this article. Please note that this is an unofficial TWRP recovery and only for the Mi Note 10 Lite (Confirm the model by going to Settings>About). The process described below is only for the rooting and installation of the TWRP on the Mi Note 10 Lite and is not tested on other devices.
If you want to exploit the full potential of your Mi Note 10 Lite hardware, the main problem is to use custom recovery methods such as TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a main device and a flashing TWRP recovery, you can install all custom ROMs, modules, kernels, Xposed, etc., as well as many applications that need access with superuser privileges to function properly. You can easily power your device with the One Click Android Root Tool, either via PC or MOT, which is a quick process.
ALWAYS know how to install the Xiaomi BlackShark root and TWRP recovery.
Brief information and benefits of TWRP recovery
The TWRP (Team Win Recovery Project) is an open source community development project. With the flashing TWRP your device can install any firmware, start your smartphone, change zip files for settings, Xposed modules for settings, root and unroot processes in one click. You can also make a full backup of Nandroid and restore it later, flash the image file with a single click, remove bloatware, overclock and underclock. The TWRP allows you to easily erase, cache and delete data after flashing an image file to display changes and correct minor errors caused by caching.
To install TWRP, your Mi Note 10 Lite phone must have an unlocked starter charger. This means that you first need to unlock the bootloader to install the root of the device, as well as to perform any configuration.
Disclaimer : While AndroidWeblog.com covers everything very clearly, so that our readers get exactly what they want, there is still a modest chance that the steps mentioned here will cause major problems. It is therefore in the user’s interest to follow the instructions very carefully in order to avoid any incident with your device.
Installing a custom ROM firmware and flashing it will definitely void your device’s warranty and AndroidWeblog.com cannot be held responsible for invalid warranties or limited devices.
Check the model number, which must be stated:
- Mi Note 10 Lite (code name: toco) on Android 10, MIUI 12
You should read the disclaimer carefully before using your phone regularly and agree to continue to take the risk.
Your phone should be at least 70% charged or you may experience complications during the experiment. Don’t take any risks and load them up completely.
If you’re installing a root of your phone or a custom ROM, it’s good practice to back up your phone. Back up all your media such as photos, videos and everything else on your PC and your contacts in the cloud.
(Applies to the PC method only, skip this step if you are using the MOTCH method).
You need to enable the USB debugging option by going to Settings, Applications and Developers.
Mi Note 10 Lite (toco) rooting downloads
You can download Xiaomi’s USB drivers here.
Download the ADB universal drivers here (if the drivers are already installed on your PC, you can skip this step).
Download here the Platform Tools/ SDK Tools with Android SDK package on the PC. (Android Command Line Tools> Package SDK Tools)
Download the TWRP Recovery for Mi Note 10 Lite here :
TWRP Recovery 3.4.0-14 (AFH Link: twrp-3.4.0-14-toco-mauronofrio)
Download SuperSU via Chainfire from here.
Download Magisk Manager from here.
Make sure you have downloaded the required files (link in the Requirements section of this article). Then go through the steps.
Mi Note 10 Lite Starter Charger Unlocking Steps (toco) on Android 10, MIUI 12
Pay attention: If you have already unlocked the bootloader, skip these steps.
As the Poco Phones is pre-installed with MIUI, it shares the bootloader unlocking with Xiaomi smartphones. Since its inception, Xiaomi has given its users the opportunity to play with their phone because Xiaomi has not restricted its use to unlock the bootloader.
Step one: Add your Mi Note 10 Lite account to the Mi account registered on your phone. Then make a full backup of your phone, because when you unlock the bootloader, all the smartphone’s data is erased.
ALWAYS pay attention to how to install the Infinix Smart 3 Plus X627 root and install TWRP Repair.
Step two: Visit the MIUI Download MiUnlock website. After visiting the website you can simply download the Mi Unlock application to your PC. Start the Mi unlocking software and log in with your Mi account/ID. Make sure you register an account with the correct information. If it’s already registered, which is often the case because you’re a Mi-user, that’s fine.
Step three: Now go to your smartphone settings, log in to your Mi Account and wait at least 7 days. If you have been logged in for at least 7 days, you can skip this step.
Step four: Go to Settings > Mi Account > Mi Cloud and enable synchronization and device search. We recommend that you synchronize all data in the application at least once.
Step five: Now turn on the development options, go to Settings > About Phone >, and tap the MIUI version at least 7-8 times until it shows that you are now a developer.
Step six: Now open the Developer Options and go to Settings > Advanced Options > Developer Options. The developer options interface allows you to enable OEM unlocking and USB debugging.
Step seven: Connect the device to an active Internet connection with the same number as the Mi Account. Then go to the Mi unlock status (under Developers) and go to the Mi account link. Now download Mi Note 10 Lite in fast download mode. Hold down the Volume down button and the power button together and release all buttons when the image of Robot Mee Rabbit appears on the screen.
Step 8 : Now make sure your device is connected to an active internet connection. Now open the Mi unlock tool and log in with the same Mi account as used for the Mi Note 10 Lite. It will detect your phone when it displays your device, just click Unlock Now. This unlocks the starter charger of the Mi Note 10 Lite smartphone and erases all data from the smartphone.
Pay attention: If the Mi Unlock tool stops at 99%, don’t panic and try the same method again the next days. Let’s hope the boat charger of the Mi Note 10 Lite is unlocked this time.
You can now use Mi Note 10 Lite root because your device’s bootloader is already unlocked.
Steps to flash/install TWRP 3.4.2B repair on Mi Note 10 Lite (toco) with Android 10, MIUI 12
Step one: Suppose you have already downloaded the platform tools from the Android SDK (SDK Manager) to your PC. The platform tools include the required ADB binaries and fast downloads.
Step two: Make sure the drivers are installed on your computer. Then proceed to the next step.
Pay attention: If the development settings and USB debug settings are already enabled on your device, as suggested in the Benefits section, just skip steps 3 and 4 and go directly to step 5.
Step three: Now enable the development settings on your Mi Note 10 Lite device. To do this, go to Settings -> About and find the construction number, then click 7 times on the construction number, which will activate the development settings on your device.
Step four: If you already have a USB debug, skip this step. Otherwise, open the developer settings and enable the USB debugging option.
Know how to install the root of your Xiaomi Redmi 6A (Cactus) and how to install the TWRP recovery.
Step five: Now open a command prompt on the computer/ADB terminal and just type the command :
Step six: The unit must not be switched to Quick Start mode. Now copy the downloaded TWRP.img file in the mandatory section to the same directory where the ADB and rapidboot binaries are located. Rename the file to twrp.img and enter this command:
Quick start flash recovery twrp.img
then execute this command, enter:
Step seven: This step is optional; Flash shares e.g. with the :
fastboot –disable-verity –disable-verification flash vbmeta vbmeta.img
Step 8 : Make sure you are browsing in the same directory as the TWRP image file and the ADB/Fastboot executable files, and enter this command:
fast flash recovery twrp-3.x.x-y-grus-Ymmdd.img
x, y and YYmmdd stand for flashable versions of TWRP, i.e. 3.3.1 or 3.3.0 etc.
Step 9 : (Important) : Some devices may not automatically replace the customized recovery upon initial start-up. You can perform a shortcut on Google to put the device in recovery mode. After executing the quick start commands, press and hold the appropriate key combination to enter TWRP mode. Once the unit is started in TWRP mode, the stock ROM is automatically patched by TWRP to prevent TWRP from being overwritten by a stock recovery.
After entering the quick restart command, press and hold the combination key and start in TWRP. Once the TWRP is loaded, the TWRP will repair the ROM to prevent the TWRP from replacing the ROM. If you do not perform this step, repeat the installation. However, you should be aware that it may be necessary to redo a copy of e.g. vb meta with authenticity disabled in order to successfully load the ROM.
How to install Mi Note 10 Lite (toco)/installation Magisk or SuperSU
Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then go through the steps.
Attention: You can use Magisk Manager or Super SU, but only one, so choose well. If you’re not sure, go to Magisk Manager.
Step one: Move the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Mi Note 10 Lite smartphone.
Step two: Now all we have to do is start the recovery. You can also back up the ROM via the TWRP interface. However, I recommend making a backup copy of the ROM. Because if the process fails, you can make the ROM blink.
Step three: Press Install and then navigate to SuperSU.zip or magisk.zip and drag the firmware confirmation file (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.
Congratulations, you are now anchored in the Mi Note 10 Lite and have also brought some light into the TWRP. You can now install Xposed Framework and customize your smartphone. If you want to check this, you can download the root status and check it through the Root Checker application.
how to root xiaomi mi note 10,mi note 10 lite xda,mi note 10 cyanogenmod,root mi note 10 pro,mi note 10 xda,miui 11 twrp install,xiaomi mi note 10 lite xda,samsung note 10 lite twrp,xiaomi europe,miui 11 eu,xiaomi eu,magisk,twrp for mi note 10,android 10 for mi note 10,mi 10 xda