How do I fix the black screen after logging in/upgrading Windows 10?

1. Use a third-party repair solution.

Black screen defects are less common and less dangerous than blue screen defects, but their behavior and appearance are similar.

Therefore, you can manipulate them and solve problems with the same tools and procedures. For this reason, you can use the following solution, even though it is designed to solve problems related to the blue screen.

The blue screen of death or BSOD (as it is also called) is a shutdown screen or exception error that appears when a fatal system error occurs on your Windows computer.

The color screen associated with this problem (blue, red, black, pink) has become synonymous with problems in Windows, which amounts to a system crash or a state in which your operating system can no longer operate safely.

BSoD errors can have several causes, including faulty hardware, corrupt drivers, problematic DLLs, power problems, or even overheating of certain parts of your PC.

Of course, hardware problems that cause BSoD can be fixed by replacing or repairing defective parts, but fixing this problem when the software is defective can be very complex and potentially dangerous to your system.

To avoid unwanted problems by trying to fix them yourself, we recommend using specialized recovery software for Windows, and the best option for this task is definitely Restoro.

Error: The file name is not specified.

This powerful yet compact software allows you to correct BSoD errors with just a few clicks without worrying about other side effects.

Next, we present you with a step-by-step guide that will allow you to successfully implement Restoro and start solving various problems, including the dreaded BSoD :

  1. Download and install Restoro
  2. Start Restoro
    • Restoro is now collecting data about your PC.

Error: The file name is not specified.

  1. Wait until it finds problems with system stability and possible malware infections.
    • Once the scan is complete, Restoro will show you an overview of the current status of your PC.

Error: The file name is not specified.

  1. Click on “Start Recovery.”
    • Restoro will now start downloading and replacing the corrupted registries, DLLs and other damaged files found during the scan.
    • This is made possible by online libraries that are used for comparison and replace damaged data with their functional equivalent.
  2. Restart your PC for all changes to take effect.

Now your computer should be working properly and you won’t have to worry about slow response times, BSoD errors or anything like that.

Warning: This program must be updated from the free version to perform some specific actions.

2. blindly trying to connect

Error: The file name is not specified.

  1. If you are on a black screen, wait for the mouse pointer to appear.
  2. Once you have the cursor in front of you, press the Ctrl key on your keyboard – this will highlight the login password field.
  3. Now enter your password. You won’t see it, but you have to do it anyway. Do it at your own pace.
  4. All you have to do now is press the Enter key and voila, you’re connected to Windows.
  5. If for some reason your desktop still does not appear after 30 seconds, try pressing Windows + P, then pressing the down arrow key twice and pressing Enter.

Then you have to type in Windows and a screen will appear.

Sometimes a black screen appears before you connect to Windows. In this case, you may not see the login box at all and enter your password.

Disable the quick start function on your PC.

Error: The file name is not specified.

3.1 Switching to Safe Mode

  1. Restart the computer a few times during the boot process.
  2. Now select Troubleshooting, Advanced Options, click Autostart Options and restart.
  3. After restarting the computer, you will be presented with a list of options. Select a version of Safe Mode by pressing the appropriate button.

3.2 Deactivating fast charging

  1. Press the Windows + S keys and go to power settings.
  2. Now select the power and standby settings from the list. Error! Filename not specified.
  3. Scroll down to the “Related Settings” section and press the “Advanced Power Settings” button. Error! Filename not specified.
  4. When the Power Options window appears, click Select, which you do with the power button on the left.
    Error: The file name is not specified.
  5. Now click Change settings not currently available.
    Error: The file name is not specified.
  6. Uncheck the “Enable Quick Start” option (recommended) and click “Save Changes”.
    Error: The file name is not specified.

Perform a system check for possible errors

Error: The file name is not specified.

Click the Start Scan button to detect problems with Windows.

Error: The file name is not specified.

Click Fix All to correct problems related to proprietary technologies.

Scan the PC with Restoro Repair Tool to find errors that cause security problems and delays. Once the scan is complete, the repair process replaces damaged files with new Windows files and components.

After disabling this feature, restart your computer and check if the problem persists. Note that disabling the Quick Start feature may slow down the startup of your PC, but this should at least solve the problem.

If you get a black screen after logging into Windows 10, the problem may be related to the Quick Start feature. This feature is useful because it speeds up the startup of the PC, but it can sometimes cause problems.

To solve this problem, you need to disable the quick start function. However, since you cannot access Windows normally, you must do so in protected mode.

4. try to start the recovery

Error: The file name is not specified.

  1. Restart the computer a few times during the boot process.
  2. Go to the Troubleshooting section, select Advanced Settings and click Start Repair.
  3. Follow the on-screen instructions to complete the process.

Once the process is complete, the problem should be resolved.

If you are stuck on a black screen after logging in, you may be able to solve the problem by performing boot recovery, so follow the instructions above.

5. disable the application preparation service.

  1. Press the Windows + R key, type services.msc and press Enter or OK.
    Error: The file name is not specified.
  2. Find the App Readiness service in the list and double-click it to open its properties.
    Error: The file name is not specified.
  3. Set the “Run” type to “Disabled” and click “Apply” and “OK” to save the changes.
    Error: The file name is not specified.

After you have disabled this service, restart your computer and check for problems. Remember that this is only a workaround and you will need to activate this service at some point.

As you know, Windows uses different services to work properly, but sometimes some services cause a black screen after connecting.

The pending application is usually the culprit, and to solve the problem, you need to disable it.

Remove the battery from the laptop (if possible).

Error: The file name is not specified.

  1. Disconnect the notebook from the adapter and remove the battery. If you do not know how to remove the battery, check the laptop manually.
  2. When the battery is removed, press and hold the power button for at least 30-60 seconds.
  3. Now insert the battery back into the laptop and reboot the laptop.

Several users have reported having a black screen after logging into their laptop, but you can easily solve this annoying problem. According to users, you just need to remove the battery from the laptop and discharge the remaining power.

It’s a relatively simple procedure, and many users say it works, so you should definitely try it. Of course, this only applies if your laptop is equipped with a removable battery.

7. Removing a problem update

  1. Use the Windows + I key combination to open the Settings application.
  2. Go to “Updates and Security. Error! Filename not specified.
  3. Now select Show update history.
  4. A list of recent updates is displayed. Make a note of some recent updates and click Remove Updates.
    Error: The file name is not specified.
  5. Double-click the update you want to remove and follow the on-screen instructions to complete the process.
    Error: The file name is not specified.

Once you have removed the problematic update, check if the problem persists.

If this problem occurred after a Windows update, it is likely that the update caused a black screen after logging in.

To solve this problem, you need to go to safe mode and remove the problematic update.

Remember that Windows tends to install missing updates automatically. So, if the problem was an update, make sure you block Windows from installing automatic updates.

A black screen can be a big problem on your computer because you can no longer access Windows. However, we hope that you were able to solve this problem with one of our solutions.

Let us know what worked for you (not necessarily in our list) by clicking on the comments section below.

FAQ: Learn more about black screen errors

  • What causes the black screen with death in Windows 10?

BSoD can be caused by a faulty driver or a hardware problem. The solution may be to boot into safe mode via the network and manually check for updates.

  • Why does my computer get stuck in sleep mode?

If you get a black screen when you try to take the computer out of sleep mode, try restarting the graphics driver by pressing Windows + Ctrl + Shift + B, or disable the quick start function.

  • What causes a black screen with the cursor?

This error usually occurs when you have two monitors. Just disconnect one of the monitors. Another cause may be a separate graphics card.

Error: The file name is not specified.
Still having problems?
Repair them with this tool:

  1. Download this highly rated PC recovery tool from TrustPilot.com (you can download it from this page).
  2. Click the Start Scanning button to scan for Windows issues that may be causing PC problems.
  3. Click “Restore All” to resolve issues related to patented technologies (exclusive discount for our readers).

Restoro was downloaded by 0 players this month.

Editor’s note: This article was originally published in March 2016 and revised and updated in February 2021 to ensure timeliness, accuracy and completeness.

Frequently asked questions

How do I fix the black screen in Windows 10 after logging in?

Recovering a black screen after upgrading from Windows 10

How can I fix the black screen after logging in?

Why does the computer screen go black when I log in?

If a black screen appears before you log into your account, there is probably a connection problem between the screen and your computer. In this case, check the physical connection and make sure both ends of the video cable are properly connected and that the correct output connector is used.

windows black screen with cursor after loginwindows 10 black screen after login after updatewindows 10 black screen before loginwindows 10 black screen with cursor before logincomputer black screen on startup windows 10windows 10 black screen with cursor no task managerwindows 10 black screen of deathblack screen after installing windows 10

You May Also Like

Zoom Camera Not Working on Lenovo laptop? (7 Quick solutions to fix it)

Since the days of Covid 19, Zoom (one of the most popular…

Super Clone: cyberpunk roguelike action for PC – Windows 7, 8, 10 – Free Download

Super Clone is a complex roguelike with a penchant for Bullet Hell…

[ Fixed ] Can’t Download from Google Drive | 2021 [ Problem Solved ]

Google is one of the most important and well known technology industries…

How to Remove a Motherboard?

Removing the motherboard is one of the most tedious tasks when it…