When you try to connect to your computer over a wireless or Ethernet network, you often find that you do not have access to the Internet, so use the Windows network diagnostics program to solve the problem. After troubleshooting is completed, you may receive an error message indicating that Windows cannot communicate with the device or source (primary DNS server).

The reason for this error text is that your device does not search for Leslie’s DNS records. However, it is connected to a static DNS server outside the Leslie network. Other possible causes of this problem include problems with the network driver, incorrect IPv4 and IPv6 settings, startup of the proxy server, or a network configuration conflict. We will discuss some of these issues and find a solution.

Windows cannot communicate with any device or source.

Try disabling proxies earlier to start with the solutions below If you have a limited internet connection, for example B. at university, at work or via public wifi, it is advisable not to contact your institutions, as this may lead to further errors. All these connections use different settings and recommendations. In addition, there may be configuration problems and you may not be able to use the Internet.

How to fix a situation where Windows cannot communicate with a device or a source error

You may now be wondering how to solve the problem that Windows cannot communicate with the device or with your computer’s sources. Don’t worry, in this article we will learn how to solve this problem. We will discuss four solutions to this annoying problem. You can try these methods to solve this problem in Windows version 7 and later.

Method 1: Automatically receiving DNS server address and IP address

Internet Protocol version 4 (IPv4) is designed for use on the packet-switched connection layer and can handle approximately 4.3 billion addresses. Conversely, IPv6 is an advanced protocol and can work with an infinite number of addresses. IPv4 uses four 1-byte decimal numbers; however, IPv6 uses hexadecimal numbers.

This may be the likely reason why Windows cannot connect to the camera, or the erroneous text in the share where the adapter settings have been selected incorrectly. You can make changes by following these steps

Step one: First open the control panel.

Step two: After seeing the large icons and clicking Network and Sharing Center, choose Show Network and Task Status.

Step three: Then click the Change Adapter Settings button.

Step four: Then right-click on the network and the Internet and select Properties.

Step five: Go ahead, mark Internet Protocol version 4 (TCP/IPv4) and click on Properties.

Step 6 : Then select Receive and automatically receive the IP address and DNS server address.

Step seven: Now click OK to change the settings.

Step 8 : Also repeat the above steps for Internet Protocol version 6 (TCP/IPv6).

Step nine: Finally, restart your computer and see if your problem is solved.

If your issue prevents Windows from communicating with a device or resource that this method does not resolve, you can use additional methods to prevent Windows from communicating with the device or resource.

Method 2: Change DNS in Google Public DNS.

Another likely cause of this problem is DNS; you can change your DNS manually. You can solve this problem by switching to a Google program and checking whether or not the connection is working. The following steps can be taken to return the changes:

Step one: First open the control panel.

Step two: Then display the large icons and click on the Network and Sharing Center.

Step three: Then click the Change Adapter Settings button.

Step four: It’s time to right click on the used network and select Properties.

Step five: Go ahead, mark the Internet Protocol version (TCP/IPv4) and then click on Properties.

Step 6 : Then select the Use the following DNS server addresses check box. Then enter 8.8.8 in the Preferred DNS Server field and 8.8.4.4 in the Alternative DNS Server field.

Step seven: Then click OK to change the settings.

Step 8 : Finally, restart your computer and see if your problem is solved.

You can use the procedure described above to manage other DNS servers of your ISP. Also ask your ISP for a list of the DNS servers running on the network. If you also receive pop-ups that cannot communicate with your network or source, it is likely that the problem is caused by the network. You should contact your network administrator.

If the switching process is not suitable to solve the question of why Windows cannot communicate with a device or share, consider the next step.

Method 3: Clear DNS cache

Another reason why Windows cannot communicate with the device is that the error text may be corrupted or the DNS cache may not be configured. You can remove the IP and DNS from your computer. The following steps can be performed to clean the cache:

Step one: First enter a command line in the search field. Then right-click on the command prompt and choose Run as Administrator.

Step two: Then enter the following commands sequentially and press Enter.

ipconfig/Flushdns

ipconfig / Records

ipconfig / Release

ipconfig / update

Step three: Finally, close the command window when you’re done and restart your computer. Now let’s see if the problem is solved.

Is your problem solved? If not, don’t worry, just try another method.

Method 4: Modification of the Hostsfile

A possible reason that Windows cannot communicate with a device or source is a host file. You need to change the host file, and this will solve your problem. Look at the next steps:

Step one: First open the driver group C:WindowsSystem32-driversetc.

Step two: Then open the Hosts file with Notepad.

Step three: Now delete the entire contents of the file.

Step four: Then press the Ctrl and S keys together (Ctrl + S) to save the file.

Step five: Finally, check whether the problem has been solved or not.

Conclusion

We hope that one of these methods will help you to fix a Windows Can’t Communicate With The Device of Resource Bug on a Windows PC. Have fun with your internet connection!

can't connect to dns server windows 7,unable to communicate with drive manager,can't connect to dns server windows 10,could not communicate with the server,dns server not responding xfinity,how to update network drivers,can't connect dns server windows 10,can t connect to dns server ethernet,the device or resource is not responding,cannot communicate with the server,windows can't connect to this network,clear vpn cache windows 10,secondary dns server,microsoft com not responding,unable to communicate with device,dns server isn't responding,windows can't communicate with the device or resource (primary dns server) win 10,cannot communicate with primary dns server windows 10,mengatasi windows cannot communicate with the device or resource (primary dns server),windows can t communicate with the device or resource wdmycloud detected detected,cannot communicate with primary dns server windows vista

You May Also Like

With Extendable Handle & Saw

Snowmobiles are a must, along with the necessary tool kit. They come…

Top 7 Best Wall Mount For Samsung Smart TV

Best wall mount for Samsung Smart TV If you are looking for…

Program on a Chromebook –

One of my main professional and entertaining activities is programming. So my…

Approaching Social Issues Via Compelling Video Content

Today, brands have taken advertising to a whole new level. Advertising is…